Press [Select] to cycle through each of these satellites until the asterisk is next to the satellite you wish to find.
Then press [Enter].
The TRAV’LER Interface will ask you to confirm the change:
Press [Select] to move the asterisk to YES.
The Trav’ler Interface will acknowledge your selection and ask:
Pressing [Enter] or choosing YES, will stow the TRAV’LER and turn it off.
Pressing [Select] then [Enter] or choosing NO will start a new search for your chosen satellite.
EMERGENCY OFF:
The Winegard TRAV’LER antenna comes with an emergency Power Off feature.To activate it, press
and hold [POWER] and then press [SELECT] while still holding [POWER]. The TRAV’LER antenna will
stop where it is and turn off.
If the Emergency Power Off is used, the TRAV’LER antenna may not be in a safe position for
travel.
DO NOT MOVE THE VEHICLE UNTIL YOU ARE ABLE TO STOW THE UNIT. See Ready to
Travel, top of page 4, Operation section.
Manual ###
*YES NO
POWER OFF
*YES NO
5
!
The TRAV’LER will remain in
manual mode until you select
multi-sat mode again.
To use the Manual Search Mode to select a specific satellite, choose Search Mode by pressing the [Enter] button.
Once in the Search Menu you may choose from:
MULTISAT MODE (The normal search mode)
MANUAL 61
MANUAL 72
MANUAL 82
MANUAL 91
MANUAL 101
MANUAL 107
MANUAL 110
MANUAL 111
MANUAL 119
MANUAL 129
MANUAL 148
MAIN MENU (returns to the User Menu)
EXIT (Enters the Search Routine)
OPERATION
!
The SK-7002 will only see
the 107° and 111° satellites in
manual mode.
