Securing the Satellite Antenna
to the Mount
Choose one of two configurations for antenna
orientation, considering the position of the cable
ports. Do not secure the antenna to the mount
assembly at this time.
Remove the two rubber feet and two foot screws
that sit on the mount base from the bottom of
the antenna. Set aside until step 7.
Remove the dome screw closest to the back
support with a 5/16
”
drive.
Align the hole in the dome (where the dome
screw was removed) with the aligned holes in the
window mount base and back support.
Install the dome screw through the aligned holes
in the back support and window mount base.
Install the rubber washer on the dome screw,
and install the dome screw through the dome.
Tighten.
To complete the installation, position the flat side
of the two rubber feet against the holes on the
bottom of the window mount base, and install
the two screws through the aligned holes in the
rubber feet, window mount base, and antenna
base. Tighten to 40 in*lbs.
1.
2.
Failure to install in accordance with product
manufacturer’s installation and assembly
instructions could result in property damage,
personal injury, and/or death.
4.
5.
3.
7.
Configuration #1
Configuration #2
6.
Only hang the window mount assembly on
the window when the vehicle is parked and
the antenna is in use; store the window
mount assembly when not in use.
Model MT-SM30 window mount should only
be deployed when the vehicle is stationary.
Do not use while the vehicle is moving.
Remove prior to traveling.
Steps 4-6
Step 7
