Hanging the Window Mount
Once ready to use the antenna, hang the window mount assembly on the window
or exterior bracket.
If hanging the assembly on the vehicle window, apply the plastic film where the
mount will be hung on the window, and then slide the clip over the plastic film.
The window may need to remain slightly open when the window mount is on the
window.
If hanging the assembly on the exterior bracket, make sure the sealant is dry,
and slide the clip into the exterior bracket. When placing the antenna on the
optional exterior bracket, ensure that the window mount is properly secured to
the optional exterior bracket; failure to secure properly may result in injury.
Before Traveling
Turn off all power.
Disconnect all cables (power and/or coax) from the Winegard product.
Carefully remove the antenna/extender and window mount from the window or
exterior bracket.
Store inside the vehicle while traveling.
Only hang the window mount assembly on an exterior bracket when the
vehicle is parked and the antenna is in use; store the window mount
assembly when not in use. Model MT-SM30 window mount should only
be deployed when the vehicle is stationary. Do not use while the vehicle is
moving. Remove prior to traveling.
Do not walk under the window mount assembly when deployed.
The window mount should be carefully hung when attaching to the window, or
the window may be damaged.
Care should be taken when using the window mount in inclement weather.
When placing the antenna on the optional exterior bracket, ensure that
the window mount is properly secured to the optional exterior bracket;
failure to secure properly may result in injury.
Model MT-SM30 window mount is intended for stationary use only and
must be removed prior to traveling. Do not deploy the window mount while
the vehicle is in motion.
1.
2.
3.
4.
Warnings
