6
Beverage Center Features and Use
Initial Setup
• Before connecting the
beverage center to the power source, let it stand upright
for approximately
24 hours.
This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
• Once you have plugged the unit into an electrical outlet, let the unit run for at
least 30 minutes to acclimate before making any adjustments.
Temperature Adjustment
• The beverage center can be set to accommodate your storage requirements. To
set the temperature, press the up or down arrow button to increase or decrease
the temperature setting until the desired temperature is attained. It may take
some time to reach the set temperature.
Shelving
(Type and number of shelves will vary per model)
Your cabinet was designed to store a maximum number of bottles and cans
securely. We recommend that you observe the tips below to optimize loading:
•
Remove all exterior and packing materials.
• Disperse the bottles and cans evenly to avoid concentrating weight in one place.
Bottles must not touch either the back of the cabinet or the step at the bottom.
Larger bottles reduce the number of bottles you can fit on a shelf.
• Make sure that the bottles and cans are not all grouped together either at the
top or bottom of the cabinet.
