
8
Setting the Temperature Control
NOTE: The temperature readout shows the actual cellar temperature, it will
temporarily show the set temperature while making adjustments, then reverts
back after 10 seconds.
1.
Make sure power cord is connected to a properly grounded outlet.
2.
Set the desired temperature by pushing the UP or DOWN button.
3.
Temperatures increase or decrease 1°F with each push of the UP or
DOWN button.
NOTE:
Temperatures may fluctuate depending on whether the interior light is ON
or OFF and depending on the position of the bottles.
Interior Light
• To complement the look of your wine collection, a soft light has been built into
the beverage center. Simply push the "Light" button and the light comes on, push
again for off. For maximum energy efficiency, leave light off when not viewing
your collection.
Normal Operating Sounds You May Hear
• Boiling water, gurgling sounds or slight vibrations that are the result of the
refrigerant circulating through the cooling coils.
• The thermostat control will click when it cycles on and off
.