14
4. Put the hood on and fix it
with the corresponding
screws, 2 at the top and 2 at
the bottom without tightening
them.
The thermostat is visible
through the opening in the
hood.
5. Connect the plug to the mains.
5. Use of the air conditioner
Use the switch (5), to switch the air conditioner on or off.
• Temperature regulation :
The temperature can be regulated between 4 and 15°C.
It is pre-set to 4°C at the factory.
The recommended temperature for optimal wine storage is 12°C.
♦
Thermostat regulation :
(indispensable when bringing the machine into service
for the first time)
- Push the button ‘ SET ‘ (3). The display
(1) will flash and indicate the programmed
temperature.
- Push the top button (2), in order to in-
crease the temperatur in the cellar.
- Push the lower button (4) to reduce the
temperature.
- Push again ‘ SET ‘ (3) to validate the re-
quired temperature.
The thermostat display always indicates the temperature of the air in the
cellar, not the temperature of the wine.
If you want to measure the temperature of the wine, the best way to do
this is to put a thermometer into a glass of water for a few hours in the
middle of the room.
