background image

BattaMax User Manual  

Revision 3.0

 

 

Page 12 of 13 

windy

nation

 

01/04/2017 

 

3.  Normalize the runtime minutes for temperature using the following formula: Rc = Ra [1 – 0.004 (Bt - 80)] 

i.  Rc = Runtime Corrected 

ii.  Ra = Actual discharge time 

iii.  Bt = Battery temperature at end of discharge (°F) 

If the discharge runtime is greater than 50% of the batteries’ rated capacity at that discharge rate, then all the 

batteries are operational. 

4.  Restart the discharger to record the individual battery voltage while still under load (current being 

drawn). 

If the discharge runtime is less than 50% of the batteries’ rated capacity, the battery with a voltage that is 0.5V 

lower than the highest voltage may be a failed battery. 

6.3  S

UPPORT

 

If you are experiencing technical problems, and cannot find a solution in this manual, you can contact Windy 

Nation Inc. for further assistance. 

  Call: (805) 323-6445 

  Email: 

[email protected]

 

  Write: 398 S. Ash St. Unit C, Ventura, CA 93001 

 

For challenging issues or to just ask a question, consider using our FREE Community Forums! Consult our 

community of DIY'ers for fast answers to all your questions. 

 

Post on our Forums: 

Windy Nation Community Forum 

6.4  L

IMITED 

W

ARRANTY

 

Windy Nation warrants that the Battery (the “Product”), will be free from manufacturing defects in materials and 
workmanship under normal authorized use consistent with product instructions for a period of one (1) year from 
the date the original purchaser (“Customer”) receives the Product (the “Warranty Period”). This warranty 
extends only to the original purchaser. The Customer’s sole and exclusive remedy and the entire liability of 
Windy Nation, its suppliers and affiliates for breach of the warranty is, at Windy Nation’s option, either (i) to 
replace the Product (or defective component part(s)) with a new or reconditioned Product (or component 
part(s)); (ii) to repair the reported problem; or (iii) to refund the purchase price of the Product. Repaired or 
replaced products are warranted for the remainder of the original warranty period only. No employee, agent, 
dealer or other person is authorized to give any warranties on behalf of Windy Nation not expressly set forth in 
this limited warranty. 

6.5  R

ESTRICTIONS

 

No warranty will apply if the Product (i) has been altered or modified except by Windy Nation; (ii) has not been 
installed, operated, repaired, or maintained in accordance with instructions supplied by Windy Nation; (iii) has 
been subjected to abnormal physical, thermal or electrical stress, misuse, negligence, or accident. If Windy 
Nation determines that the problem with the Product is not due to a manufacturing defect in Windy Nation’s 
workmanship or materials, or otherwise does not qualify for warranty repair, then the Customer will be 
responsible for the costs of all necessary repairs and expenses incurred by Windy Nation. 

6.6  W

ARRANTY 

C

LAIMS 

&

 

R

ETURN 

P

ROCEDURES

 

To be eligible for service under this warranty, the Customer must submit a service request within the Warranty 
Period by contacting Windy Nation in writing or via telephone and obtaining a Returned Materials Authorization 
(“RMA”) number. This RMA must be obtained before returning any product under this warranty.  Notification 
must include a description of the alleged defect, the manner in which the Product was used, the serial number, 
and the original purchase date in addition to the name, address, and telephone number of the Customer. Within 
five (5) business days of the date of notification, Windy Nation will provide the Customer with an RMA number 
and the location to which the Customer must return the defective Product. Any Product returned for warranty 
service shall be shipped at the expense and risk of the Customer. The Customer must return the entire Product 
kit (or, if authorized by Windy Nation, the defective component parts), within fifteen (15) days after issuance of 

Summary of Contents for BattaMax BAT-NSAP12-040














Reviews: