2
A DVA N CED CO R DL E S S PH O N E Q U ICK S TA R T GU IDE
Unpack the handset
Do not discard the box, you’ll need the IPEI found on the label in a later step.
1. Connect the plug to the AC adapter and plug it into a 120V AC receptacle. Connect
the other end to the bottom of the charging cradle.
2. On the handset, remove the battery cover and insert the battery. Replace the
battery cover. Attach the optional belt clip to the handset if desired.
3. Place the handset into the charging cradle to charge. A full charge takes about
7 hours.
Repeat steps for any additional handsets.
Unpack the base
Do not discard the box, you’ll need the MAC found on the label in a later step.
1. Select a suitable location to mount the base. It should be centrally located for the
best coverage and away from any sources of interference like other cordless bases,
power transformers, radio transmitters, microwave ovens, etc.
Mount the base vertically on the wall at a height above your cube walls, but not too
close to the ceiling, as that will interfere with radio coverage. Mounting screws are
included in the box.
2. Connect the base to your LAN using the included Ethernet cable.
3. Connect the power adapter to the base and plug it into a 120V AC receptacle.
Advanced Cordless Phone Quick Start Guide
Ear Piece Speaker
3 Softkeys
Screen
LED
Activity Menu Key
Speaker Key
Selection Key
Navigation Keys
Call Key/Accept Call Key
End, ON/OFF Key, Back Key
