background image

 

                                                       SAFETY 

86309580   FLOOR POLISHER 10/08/08 

2-3

The following symbols are used throughout this guide as indicated in their descriptions: 
 

HAZARD INTENSITY LEVEL 

There are three levels of hazard intensity identified by signal words – 

WARNING

 and 

CAUTION

 and 

FOR SAFTEY.

  The level of hazard intensity is determined by the following definitions: 

 

WARNING – 

Hazards or unsafe practices which COULD result in severe 

personal injury or death. 

 
 

CAUTION – 

Hazards or unsafe practices which could result in minor personal 

injury or product or property damage. 

 

FOR SAFETY:  To identify actions which must be followed for safe operation of equipment. 

Report machine damage or faulty operation immediately.  Do not use the machine if it is not in proper 
operating condition.  Following is information that signals some potentially dangerous conditions to the 
operator or equipment.  Read this information carefully.  Know when these conditions can exist.  Locate 
all safety devices on the devices on the machine.  Please take the necessary steps to train the machine 
operating personnel. 
 

FOR SAFETY: 

DO NOT OPERATE MACHINE: 

 

Unless Trained and Authorized. 
Unless Operation Guide is Read and Understood. 
In Flammable or Explosive areas. 
In areas with possible falling objects. 
 

WHEN SERVICING MACHINE: 
Avoid moving parts.  Do not wear loose fitting clothing, jackets, shirts, or sleeves when working 
on the machine.  Use approved replacement parts. 
 

 

Summary of Contents for STORM SP13




































Reviews: