EN
157
Overview
Installation
Use
Maintenance
Warranty
Warranty
This warranty does not cover failures due to:
•
Abnormal environmental conditions:
•
All types of damage caused by shaking or the appliance falling during handling after leaving the
factory.
•
Placing the appliance in a location subject to frost or bad weather (humid, aggressive or poorly
ventilated environments).
•
Use of water with aggression criteria such as those defined by the DTU 60-1 contract bill for
sanitary plumbing, hot water 4 additives (chlorides, sulphates, calcium, resistivity and TAC).
•
Water having a Th < 8° f.
•
Water pressure above 0.5 MPa (5 bar).
•
Power supply with significant overvoltages (
network, lightning, etc.
).
•
Damage resulting from undetectable problems due to the choice of location (
hard to reach
locations
) that could have been avoided by immediate repair of the unit.
•
An installation non-compliant with regulations, standards and industry practices, in particular:
•
Safety unit removed or rendered inoperative (pressure reducer, non-return valve or valve, etc.,
placed upstream of the safety unit).
•
Absence or incorrect fitting of a new safety unit in accordance with standard NF-EN-1487,
modification of its calibration, etc.
•
Absence of sleeves (
cast iron, steel or insulation
) on the hot water connection pipes that can lead to
corrosion.
•
Faulty electrical connection: not compliant with NFC 15-100, incorrect earthing, insufficient cable
cross-section, connections with flexible cables without metal tips, non-compliance with the
connection diagrams specified by the manufacturer.
•
Switching on the appliance without filling it (dry heating).
•
Not positioning the appliance according to the instructions in the manual.
•
External corrosion due to poor sealing on the pipework.
•
Installation of a sanitary loop.
•
Incorrect settings in the case of a ducted installation.
•
Duct configuration contrary to our recommendations.
•
Faulty servicing:
•
Abnormal scaling of heating elements or safety devices.
•
No servicing of the safety unit resulting in overpressure.
•
Non-cleaning of the evaporator or the condensate discharge.
•
Changes to the original equipment, without permission from the manufacturer or use of spare
parts not recommended by the latter.
1. Scope of the warranty.
A damaged appliance must be left in place for experts to review, the customer must inform his
insurer.
Summary of Contents for AquaWIN Air 203
