background image

11. Oscillation

 

Press the OSCILLATION button to turn on or off the
oscillation function.

12.  Mode (Normal, Natural or Sleep Wind)

Press the mode key to choose wind mode.

Normal Wind Mode: fan operates at selected speed
setting.

Natural Wind Mode: fan operates at preset rhythm to
simulate natural wind by microprocessor control.

Sleep Wind Mode: fan operates at preset rhythm and
for duration of timer setting. Fan turns off
automatically when time elapses.

13.  Off (Power Off)

Press the “Off” button to turn the fan off.  All function
keys will remain inactive until the fan is turned on.

CARE AND STORAGE

1.  BE SURE THE ELECTRICAL PLUG IS REMOVED FROM

THE ELECTRICAL SOCKET BEFORE ATTEMPTING
ANY CLEANING OR MAINTEMANCE.

2.  Use only a soft moistened cloth with a soap solution to

clean your fan.

3.  Do not immerse the fan in water and never allow water to

drip into the motor housing.

4.  Do not use a gasoline thinner or other chemicals to clean

fan.

5.  For storage, clean fan carefully as instructed and store in

its original box.  Store the fan in a clean, dry place.

ELECTRICAL RATINGS

1.  This product has been rated at 120VAC 60Hz 44W Max.
2.  If you experience a problem, see a qualified technician for

service and repair.

7

TROUBLESHOOTING

Problem

Remedy

No Power

Make sure unit is plugged into a live
socket.

Remote does not work

Check to see if batteries are in
correctly. Replace batteries.

The cable clamp is missing

The cable clamp and its screws are
located under the rear base, note
the diagram in the Assembly
Instructions section of this manual.

Fan wobbles when touched

The WindColumn is designed to
oscillate from side to side; therefore,
it will pivot on the oscillation
mechanism when touched. 
However, the fan should not wobble
when it is operating and not being
touched.  If the WindColumn does
wobble when it is operating and not
being touched, check that it is
properly secured to the base and
make sure that it is placed on a level
surface.

CAUTION

There are no consumer serviceable parts inside this fan.  If
you experience a problem, please see warranty for
information.  Please do not attempt to service the fan; doing
so will void your warranty and could cause damage and
personal injury.

8

Summary of Contents for Windcolumn WCFR1






Reviews: