OPERATING INSTRUCTIONS
1.
Set the fan on a level and dry surface.
2.
Plug the power cord into a standard 120-volt AC wall
outlet.
3.
Always point the remote control signal emitter toward the
fan when operating.
4.
Do not abuse the remote control.
5.
Make sure that the signal path is not obstructed.
6.
You can operate the fan by either the remote control or
the soft-touch control panel on the fan.
7.
All function keys are enabled after pressing the
On/Speed button.
8.
Operating Flow (Control Panel & Remote Control are the
same)
5
On/Speed
Speed
Low - Med - Hi
Mode
Timer
1Hr - 2Hr - 4Hr - 8Hr - Off
Natural - Sleep - Normal
Off
Power Off
9. On/Speed
-
When you press the On/Speed button, the fan will
start on the low speed setting and normal wind
mode.
-
You can select low, medium or high speed by
pressing the On/Speed button.
-
The LED light on the control panel indicates the
selected speed setting.
10. Timer (1 hr, 2 hr, 4 hr and 8 hr)
-
You can select from four (4) different timer settings by
pressing the Timer button on the fan or the remote
control.
-
The control panel LED light corresponding to the
selected setting will illuminate to indicate the timer
setting.
- If no light is illuminated, the timer is off.
6