Wincor Nixdorf TH230 Programmer'S Manual Download

Page: 96 / 293

TH230/TH230+

Programmers Guide

GS “ U

Function:

Flash Memory User Sectors Allocation

Code ASCII:

“

Code HEX:

0x1D 0x22 0x55

Range:

0 ≤

≤ 8

0 ≤

≤ 8

<= 8 is equivalent to 512k user memory

Description: n1

is the number of 64k sectors used for logos and user-defined characters.

is the number of 64k sectors used for user data storage.

This command sets the allocation of flash sectors among user data storage,

logos/user-defined characters, and electronic journal. This allocation is

saved in the EEPROM of the printer and is therefore saved across power

cycles.
The printer will respond to the flash allocation command being sending ACK

(0x06) or NAK (0x15).

<= 8 is equivalent to 512k user memory

Notes:

•

Flash memory is made up of user and program code. Therefore, the

available flash memory space will vary with the amount of program code

utilized.

•

is greater than the maximum number of sectors available, the

command is ignored and the printer responds with NAK (0x15).

•

Issuing this command with parameters different from current

parameters will erase all sectors.

•

The logo/user-defined character memory and the user datastorage

shared the 512K user memory with some header data. Follow sizes have

to subtract form the 512K:

•

1K Flash info

•

4 Byte partition header logo/user-defined character memory

•

4 Byte partition header user data storage

•

= 0 the minimal size of partition header will be left

•

and

= 0 the command will be ignored

Summary of Contents for TH230






































































































































































































































































































Search results

Summary of Contents for TH230

Reviews:

Related manuals for TH230

Brands by name

Popular brands

Wincor Nixdorf TH230, Programmer'S Manual

Search results

Summary of Contents for TH230

Reviews:

Related manuals for TH230

Brands by name

Popular brands