Wincor Nixdorf TH230 Programmer'S Manual Download

Page: 12 / 293

TH230/TH230+

Programmers Guide

Operator Panel

The Operator Panel consists of one button and three LED’s. In addition there is one power

button to switch the printer on and off. In the following description, you can see which

function of the printer influence the LED’s and which functions are executed with the

buttons:

Linefeed Button

If you push this button once and release it, the printer executes a small paper feed. If you

push this button and hold it down, the printer feeds the paper as long as the button isn’t

released.
This button is also used in the self-test printing see chapter Print Service Menu on page

246.

Power LED Green

Off:

Power is not stable.

On:

Power is stable.

Blinking: The maximum power setting is auto and no Wincor Nixdorf power supply is

used. The maximum power setting can be changed by the command GS ( E

fn=5 (see page 105). The user has to set a fix maximum power setting

according to the used power supply.

This LED is also used in the Diagnostic mode (see page 246).

Paper End LED Yellow

Off:

Paper is loaded (Normal condition).

On:

Printer detects paper roll end or paper roll near end.

This LED is also used in the Diagnostic mode (see page 246).

Error LED Red

Off:

Normal Condition.

On:

Offline.

Blinking: Error.

This LED is also used in the Diagnostic mode. For an exact description of this LED see page

246 and page 287.

Summary of Contents for TH230






































































































































































































































































































Search results

Summary of Contents for TH230

Reviews:

Related manuals for TH230

Brands by name

Popular brands

Wincor Nixdorf TH230, Programmer'S Manual

Search results

Summary of Contents for TH230

Reviews:

Related manuals for TH230

Brands by name

Popular brands