Wincor Nixdorf TH230 Programmer'S Manual Download

Page: 47 / 293

Programmers Guide

TH230/TH230+

•

The underline thickness is that specified by ESC –, regardless of the

character size.

•

When underline mode is turned on, 90° clockwise-rotated characters

and white/black reverse characters cannot be underlined.

•

The printer cannot underline the space set by HT, ESC $, and ESC \.

•

Character configurations Bit 0:

Pitch

Dots

Columns

80 mm

Paper

Columns

57.5 mm

Paper

CPI

Font A 13 x 24 44

15.6

Font B 10 x 24 57

20.3

•

The settings of this command are effective until ESC @ is executed, the

printer is reset, or the power is turned off.

•

The emphasized mode is not effective if smooth mode on (GS b)

ESC $

Function:

Set absolute print position

Code ASCII:

ESC $

Code HEX:

0x1B 0x24

Range:

≤

255

≤

255

Default:

× 256 = 0

Description:

Sets the print starting position to (

× 256) × (horizontal or vertical

motion unit) from the beginning of the line.

Notes:

•

The printer ignores any setting that exceeds the printing area.

•

When standard mode is selected, the horizontal motion unit is used.

•

When page mode is selected, the horizontal or vertical motion unit is

used for the print direction set by ESC T.

• When the starting position is set to the upper left or lower right of the

printing area using ESC T, the horizontal motion unit is used.

• When the starting position is set to the upper right or lower left of the

printing area using ESC T, the vertical motion unit is used.

•

Even if the vertical or horizontal motion unit is changed after changing

the printing position, the setting of the printing position will not be

changed.

•

Even if underline mode is turned on, the underline will not be printed

under the space skipped by this command.

•

The vertical or horizontal motion unit is specified by GS P.

Summary of Contents for TH230






































































































































































































































































































Search results

Summary of Contents for TH230

Reviews:

Related manuals for TH230

Brands by name

Popular brands

Wincor Nixdorf TH230, Programmer'S Manual

Search results

Summary of Contents for TH230

Reviews:

Related manuals for TH230

Brands by name

Popular brands