Wincor Nixdorf CINEO C1030, Installation Manual

Page: 9 / 35

Important Notes
5
Important Notes
Appliances supplied by Wincor Nixdorf International GmbH comply with the respective
safety regulations for data-processing installations and information technology installations,
including electrical office equipment for use within an office environment.
Whenever work of any kind is done on the device, as well as when data cables are
plugged and unplugged, the device must be completely disconnected from the line
voltage.

Appliances may only be repaired by authorized technicians.

Unauthorized opening of the housing or inexpert repairs can result not only in
considerable personal danger, but will also invalidate your warranty and liability
protection.

Always consult the enclosed documentation before doing any work with this
appliance.

If this device is brought from a cold environment into a heated place of business,
condensation may occur. Before operation, the device must be completely dry.
Therefore, an acclimatization period of at least two hours must be adhered to.

Always lay the supply leads and cables in such a way that they cannot be stepped on
or tripped over.

Only touch green marked handles and knobs for moving parts.

Exchange damaged cables immediately.

In order to completely disconnect the device from the power source, turn the device
off and use the separator in the fuse box\building installation.

Make sure that no objects (such as paper clips) can reach the interior of the device,
since electrical shocks or short-circuits could result.

To avoid overheating of the power supply unit ensure that the CINEO C1030 receives
adequate ventilation.

During an electrical storm, data cables should not be plugged in or unplugged.

Keep the device away from vibrations, airstreams/ventilations, dust, humidity and
heat.

Ensure that used parts are disposed of in an
environmentally friendly
manner.