D- Sub- Jack po wer supp lied (COM2*)
The interface connection is a 9-pin D-sub jack for scanner, user or customer
displays without own power supply.
Make sure that the con nec tor for the cus to mer dis play is scre wed
firm ly to the so cket to pre vent pos si ble mal functio ning. Po wer is
supp lied via this jack.
If COM2 is equip ped with a con nec tor, this in ter fa ce does not car ry
a cur rent.
USB (Uni ver sal Se ri al Bus)- A, USB 2.0
You can connect several USB peripheral devices to the USB or powered
USB interface (12V or 24V).
Only con nect de vi ces equip ped with a shiel ded ca ble to the USB-in -
ter fa ce.
RJ45 (LAN)
The system can be connected to a network (LAN) from the POS terminal
back panel.
LEDs
left LED
flashs green
With running network connection
(Network cable connection ON, e.g. HUB,
Router) “Up link”
right LED
flashs yellow
during network traffic
Only con nect shiel ded LAN ca bles (CAT5) as the se of fer a bet ter
pro tec ti on in case of in ter fer en ces in a network.
BEETLE /S-II plus
23
