Configuration variants
Submodules for the CPU
Various controllers can be plugged in on the CPU. The following is a brief
description of the available options:
LAN controller 10/100 Mbit (PCI)
This controller can be used to incorporate the BEETLE NetPOS in an
Ethernet network (10/100 Base T). It uses the internal PCI bus.
CRT- or TFT-adapter
Both adapters must be installed alternatively. You can connect either a CRT
monitor or a TFT-LCD module with optional touch screen functionality.
When installing a TFT adapter with touch screen functionality make sure
that the internal loudspeaker will be taken off to activate the loudspeaker in
the screen display (see chapter installation in the manual of the screen
display) and the touch functionality will be activated via jumper (see jumper
settings in the manual “BEETLE POS Motherboard”).
The COM2 interface is no longer valid for external use. If the BEETLE
system is pre-installed ex works, COM2 will delivered with a cover.
SUBMODULES FOR THE CPU
26
