Rear panel of the power supply
Keyboard (KYBD)
The BEETLE NetPOS has a 6-pin mini-DIN jack for connecting a keyboard.
Make sure that the connector is plugged firmly into the socket to prevent
malfunctioning. Power is supplied to the keyboard via this socket. If you
wish to connect a standard PC keyboard with DIN connector, you must use
a special adapter cable, obtainable from the WN branch office responsible
for your area.
When removing cables with locks, please grip the cable at the connector
housing.
Scanners and scales (COM1 - COM4*)
Depending on the systems configuration, scanners without an independent
power supply are connected to the COM2*, COM3* or COM4* serial
interface (standard setting COM3). Connect scales with their own power
supply to the COM1 interface. COM1 is designed as a 9-pin D-sub plug,
whereas COM2* - COM4* are 9-pin D-sub jacks.
Make sure that the scanner connector is plugged securely into the socket to
prevent possible malfunctioning.
If you connect scales to the BEETLE NetPOS which are not supplied by
Wincor Nixdorf, you must obtain a licence for the driver software.
CONNECTING PERIPHERALS
16
Subconnector
Mains
0 I
DC 24V
100-120 V ~ 2A max.
200-240 V ~ 1A max.
1
2
cashdr only
ON/OFF
Cash Drawer 1, 2
POS Printer Power
Mains Socket