19
Boot
Boot Option #1
Sets the system boot order
Hard Drive BBS Priorities
Set the order of the legacy devices in this group
Fast Boot
Enables or disables boot with initialization of a minimal set of devices required to launch active boot
option. Has no effect for BBS boot options.
Boot From Onboard LAN
Allow the system to be waked up by the onboard LAN.
Setup Prompt Timeout
Configure the number of seconds to wait for the setup hot key .
Bootup Num-Lock
Select whether Num Lock should be turned on or off when the system boots up.
Boot beep
Select whether the Boot Beep should be turned on or off when the system boots up. Please note that a
buzzer is needed.
Full Screen Logo
Enable to display the boot logo or disable to show normal POST messages
CSM(Compatibility Support Module)
OpRom execution, boot optios filter, etc.
CSM
Enable to launch the Compatibility Support Module. If you are using Windows 8 64-bit UEFI and all of
your devices support UEFI, you may also disable CSM for faster boot speed..
Launch PXE OpROM policy
Select UEFI only to run those that support UEFI option ROM only. Select Legacy only to run those that
support legacy option ROM only. Select Do not launch to not execute both legacy and UEFI option ROM.
Launch Video OpROM policy
Select UEFI only to run those that support UEFI option ROM only. Select Legacy only to run those that
support legacy option ROM only. Select Do not launch to not execute both legacy and UEFI option ROM.
