Acknowledgments
Greeting & Setup
Thank you for purchasing the WTP-8B66 Panel PC. We wish that this unit will be durable and reliable in providing
your needs. Please follow the instructions below to ensure the unit continues to have high performance
Unpacking
After opening the carton, there will be a unit with an accessory box. Examine the contents to see if there are
damages to the unit and if all accessories are present.
Setting up
Please read this manual carefully and remember to keep this manual for future reference.
Safety Instructions & Cleaning
The unit has undergone various tests in order to comply with safety standards. Inappropriate use may be
dangerous. Please remember to follow the instructions below to insure your safety during the installation and
operating process.
Transporting & Placement of unit
1.
When moving the unit on a cart; be very cautious. Quick stops, excessive forces and uneven surfaces may
cause the cart to overturn thus risking the unit to fall to the ground.
2.
If the Monitor display unit does fall to the ground, immediately turn the power off and disconnect cords. Then
contact a service technician for repairs. Continual use of the unit may result cause a fire or electric shock. Also,
do not repair the unit on your own.
3.
Having two or more people transporting the display unit is recommended. In addition, when installing the open
frame by suspending it also requires two or more people.
4.
Before suspending the unit, make sure the material used for suspension is sturdy and stable. If not properly
suspended, the display unit may fall and cause serious injury to people standing nearby as well as to the unit
itself.
5.
If you wish to mount the display unit, remember to use only the mounting hardware recommended by the
manufacturer.
Electrical and Power Source Related
1.
This Monitor display unit must operate on a power source as shown on the specification label. If you are not
sure what type of power supply used in the area, consult your dealer or local power supplier.
2.
The power cords must not be damaged. Applied pressure, added heat, and tugging may damage the power
cord.
3.
The power cord must be routed properly when setup takes place. We advise that this aspect measure is to
prevent people from stepping on the cords or while the unit is suspended to prevent flying objects from getting
tangled with the unit.
4.
Do not overload the AC outlets or extension cords. Electrical shocks or fires may occur from overloading.
5.
Do not touch the power source during a thunderstorm.
6.
If your hands are wet, do not touch the plug.
7.
Use your thumb and index finger, grip firmly on the power cord to disconnect from the electrical socket. By
pulling the power cord, may result in damaging it.
