10
Setting up the System
The following is a summary of the steps in setting up the system for use.
CAUTION: Make sure that power to the system and each of the devices to be connected is switched OFF before
plugging in the connectors.
1.
Make any required external connections such as the keyboard, and mouse.
2.
Plug the appropriate end of the power cord into the power connector of the system. Then plug the other end of the
power cord to an electrical outlet.
3.
Press the power switch of the system to turn on the system’s power.
4.
If necessary, run the BIOS SETUP program to configure the system (see Chapter 3).
5.
Install the software drivers if necessary.
Installing System Software
Recent releases of operating systems from major vendors include setup programs, which load automatically and guide
you through hard disk preparation and operating system installation. The guidelines below will help you determine the
steps necessary to install your operating system on the Panel PC hard drive.
NOTE: Some distributors and system integrators may have already pre-installed system software prior to shipment of
your Panel PC.
Installing software requires an installed HDD. Software can be loaded in the WTP-8B66 Panel PC using any of below
methods:
Method 1: Use the Ethernet
You can use the Ethernet port to download software from the net to the HDD that has been pre-installed in
WTP-8B66
Panel PC
Method 2: Use the COM Port
By connecting another PC to the
WTP-8B66
Panel PC with an appropriate cable, you can use transmission
software to transmit Operation System Software to the HDD that has been pre-installed in the
WTP-8B66
Panel PC.
Method 3: Use a External CD-ROM
In order to boot up system from USB-CD/DVD drive, please connect USB-CD/DVD drive, turn on computer power,
keep on pressing “F11” key, go into BIOS quick boot menu, select “USB-CD ROM”, WAIT FOR 20 SECONDS, then
press enter, system OS will boot up from USB-CD/DVD drive directly
Then you can use the external CD-ROM to transmit the software to the HDD that has been pre-installed in the
WTP-8B66
Panel PC
Installing the Drivers
After installing your system software, you will be able to set up the LAN, VGA, Audio and USB functions. All drivers are
stored in a CD disc, which can be found in your accessory pack.
The various drivers and utilities in the disc have their own text files that help users install the drivers and understand their
functions.
Follow the sequence below to install the drivers:
Step 1 – Install Intel® INF Driver
Step 2 – Install Intel® VGA Driver
Step 3 – Install Intel® LAN Driver
Step 4 – Install Audio Driver
