III
1.
When moving the unit on a cart; be very cautious. Quick stops,
excessive forces and uneven surfaces may cause the cart to
overturn thus risking the unit to fall to the ground.
2.
If the Monitor display unit does fall to the ground, immediately
turn the power off and disconnect cords. Then contact a
service technician for repairs. Continual use of the unit may
result cause a fire or electric shock. Also, do not repair the
unit on your own.
3.
Having two or more people transporting the display unit is
recommended. In addition, when installing the open frame by
suspending it also requires two or more people.
4.
Before suspending the unit, make sure the material used for
suspension is sturdy and stable. If not properly suspended,
the display unit may fall and cause serious injury to people
standing nearby as well as to the unit itself.
5.
If you wish to mount the display unit, remember to use only
the mounting hardware recommended by the manufacturer.
Electrical and Power Source Related
1.
This Monitor display unit must operate on a power source as
shown on the specification label. If you are not sure what type
of power supply used in the area, consult your dealer or local
power supplier.
2.
The power cords must not be damaged. Applied pressure,
added heat, and tugging may damage the power cord.
3.
The power cord must be routed properly when setup takes
place. We advise that this aspect measure is to prevent
people from stepping on the cords or while the unit is
suspended to prevent flying objects from getting tangled with
Summary of Contents for WLP-7B20 Series
