Wincomm WLP-7B20 Series, User Manual

Page: 24 / 63

15
your Panel PC.
Installing software requires an installed HDD. Software can be
loaded in the WLP-7B20 Panel PC using any of below methods:
Method 1: Use the Ethernet
You can use the Ethernet port to download software from the
net to the HDD that has been pre-installed in WLP-7B20 Panel
PC
Method 2: Use the COM Port
By connecting another PC to the WLP-7B20 Panel PC with an
appropriate cable, you can use transmission software to
transmit Operation System Software to the HDD that has been
pre-installed in the WLP-7B20 Panel PC.
Method 3: Use a External CD-ROM
In order to boot up system from USB-CD/DVD drive, please
connect USB-CD/DVD drive, turn on computer power, keep on
pressing “F11” key, go into BIOS quick boot menu, select
“USB-CD ROM”, WAIT FOR 20 SECONDS, then press enter,
system OS will boot up from USB-CD/DVD drive directly
Then you can use the external CD-ROM to transmit the software
to the HDD that has been pre-installed in the WLP-7B20 Panel
PC
Installing the Drivers
After installing your system software, you will be able to set up the
LAN, VGA, Audio and USB functions. All drivers are stored in a CD
disc, which can be found in your accessory pack.