WINCODE LP423N, User Manual

Page: 59 / 68

LP4 USER MANUAL
- 58 -
5.2 Settings
1) Print Job
Item Description
Printing Speed (mm) Select required speed
Printing Darkness Select the required parameters from 0 to 15; adjust the
temperature of the print head (8 is recommended for wax
ribbon)
Device Selection Normal, tear-off, peel-off and cutter modes are selectable.
Printing Mode Direct Thermal and Thermal Transfer modes are selectable
Feed Position Offset (After
printing)
Input the required parameters. (If the printer is connected
to cutter/peeler, user may use this for offset settings.
Default: 0)
Start Position Offset
(Before printing)
Input the required parameters (Plus value feeds more
distance; minus value back feeds more distance)
* 203 dpi:8dot=1mm, 300 dpi:12dot=1mm
Feed to device after pause
Close: while pressing button, printer stop printing
immediately.
Open: while pressing pause button, printer will stop
printing after completing the current label.
Label Direction Label-out from the top or Label-out from the bottom
Mirror Drawing No effect or mirror reflection.