LP4 USER MANUAL
- 19 -
2.4 Real Time Clock Battery Installation
2.4.1 Get started
(Battery is excluded in the LP4N model)
1)
Turn off the power, and then remove the power cord and relevant connected
cable.
2)
Open the chassis cover at the bottom, there is a battery with insulation sheet.
3)
Pull out the insulation shim.
2.4.2 Replace the battery
1)
Turn off the power and disconnect all the cables attached.
2)
Loose the three screws at the bottom, and then open the lower part cover to
see the motherboard.
3)
Press the button beside the battery as below figure.
4)
The battery would be left from the mount.
5)
Place a new battery and then press until it is fixed in the installation mount.
*Notice: the battery model CR2032 is recommended.
Summary of Contents for LP423N
