3
REV C
OPM-107
COPY YOUR MODEL AND SERIAL NUMBER HERE
No other WINCO generator has the same serial number as yours.
If you should ever need to contact us on this unit, it will help us to
respond to your needs faster.
MODEL __________________________________________________
SERIAL NUMBER _________________________________________
PURCHASE DATE _________________________________________
DEALER NAME ___________________________________________
DEALER PHONE # ________________________________________
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed
during installation and maintenance of the generator. Read and
understand all instructions in the manual before starting and operating
the generator.
USING THIS MANUAL
Congratulations on your choice of a WINCO generator. You have
selected a high-quality, precision-engineered generator designed and
tested to give you years of satisfactory service.
To get the best performance from your new generator, it is important
that you carefully read and follow the operating instructions in this
manual.
Should you experience a problem please follow the “Troubleshooting
Tables” near the end of this manual. The warranty listed in the manual
describes what you can expect from WINCO should you need service
assistance in the future.
SPECIFICATIONS
GENERATOR
Model W6010DE/I,
J,
&
K
Starting
Watts
6,010
Running Watts
5,160
Volts
120/240
Starting
Amps
50/25
Running
Amps
43/21.5
Generator Manufacturer
Mecc Alte Spa
Generator Model Number S20FS-160/A
Part
Number
351836-1
Rotor Resistance
6.57 Ohms
Stator Resistance
0.124 Ohms
Cap Winding Resistance
0.60 Ohms
Capacitors 31.5
mF
Capacitor Part Number
300323-112
ENGINE
Engine Manufacturer
Kohler
Engine Model Number
KD440
Fuel
Type
Diesel
Oil Capacity
51.2 oz. (1.6 qts)
TESTING POLICY
Before any generator is shipped from the factory, it is fully checked
for performance. The generator is loaded to its full capacity, and the
voltage, current, and frequency are carefully checked.
Rated output of generator is based on engineering tests of typical units,
and is subject to, and limited by, the temperature, altitude, fuel, and
other conditions specified by the manufacturer of applicable engines.