manualshive.com logo in svg

Winco TransMotion TMM3, Owners Operating & Maintenance Manual, Page: 26 / 28

Share
Download
Winco TransMotion TMM3 Owners Operating & Maintenance Manual Download Page 26

OWNERS OPERATING & MAINTENANCE MANUAL

TMM3 VIDEO FLUOROSCOPY STRETCHER-CHAIR

Page 26 of 28

Document #OM-TMM-2228-13
Revision: V

WARRANTY INFORMATION

LIMITED WARRANTY

Winco Mfg., LLC provides the following Limited Warranty covering defects in materials and workmanship 
on 

TransMotion by Winco products

:

• 

7-Year / Lifetime Warranty for Frame / Welds

• 

2-Year Warranty on Components 

(*excludes batteries and any necessary labor)

The Limited Warranty period begins when the product is delivered to the Buyer.

The Limited Warranty applies when the product is used and cared for as specified by Winco Mfg., LLC. If 
the product is not used and cared for as specified, the Limited Warranty is void. Adjustments under this 
Limited Warranty will be made only after completion of inspection of the part or product by Winco Mfg., 
LLC. Winco Mfg., LLC’s liability under the Limited Warranty shall extend only to the replacement of any 
defective component or product as determined by Winco Mfg., LLC’s inspection.

Winco Mfg., LLC’s liability for any defective goods is limited to the invoice price or replacement cost of 
the defective product/component, whichever is lower.

The Limited Warranty for any product sold as a “demonstration unit” shall be limited to a period of one (1) 
year (frame/welds and components).

OPTIONAL EXTENDED LIMITED WARRANTY

As a supplement to your TransMotion by Winco Limited Warranty, you may elect to purchase an 
additional one, two, or three years of protection. The Extended Limited Warranty 

MUST

 be purchased 

within 364 days of the original purchase date

.

A TransMotion by Winco Extended Limited Warranty applies when the product is used and maintained 
as specified by Winco Mfg., LLC. If the product is not used and maintained as specified, the Extended 
Limited Warranty is void. 

Winco Mfg., LLC’s liability under the Extended Limited Warranty shall extend only to the replacement of 
any defective component or product as determined by Winco Mfg., LLC’s inspection.

Batteries and Pad Sets are excluded from all TransMotion by Winco warranties.

Products sold as 

demonstration units

 are only eligible for a 

One Year Extended Warranty

.  The 

Extended Warranty 

MUST

 be 

purchased within 364 days of the demonstration units purchase date

.

Summary of Contents for TransMotion TMM3





























Reviews:

No comments