manualshive.com logo in svg

Winco TransMotion TMM3, Owners Operating & Maintenance Manual, Page: 20 / 28

Share
Download
Winco TransMotion TMM3 Owners Operating & Maintenance Manual Download Page 20

OWNERS OPERATING & MAINTENANCE MANUAL

TMM3 VIDEO FLUOROSCOPY STRETCHER-CHAIR

Page 20 of 28

Document #OM-TMM-2228-13
Revision: V

“B” OPTION: BATTERY PACK

• 

REMOVING BATTERY PACK FROM CHAIR

Grasp integrated handle on battery pack and pull away from chair 
until cam locks disengage. Remove battery from mounting bracket.

• 

INSTALLING BATTERY PACK ONTO CHAIR

Place two round, cam locks on back of battery into square 
openings of mounting bracket. Once in place, slide battery down 
(inward toward column) until cam locks engage.

For additional information, refer to the Installation and Usage 
Instructions for Battery Replacement (IM TMS-311-90).

• 

ADDITIONAL BATTERY INFORMATION

"B" option chairs come with an additional battery and a wall-mountable battery charger. 
The additional battery may be stored in the wall charger or on an optional mobile 
battery stand.

For more information related to the battery and charger, see "Battery Charger Installation 
and Usage Instructions" (IM TMA57-15).

OPTIONS: CONTINUED

Summary of Contents for TransMotion TMM3





























Reviews:

No comments