Winco S300 Stretchair Owners Operating & Maintenance Manual Download Page 4

IMPORTANT - PLEASE READ

1.  READ AND FOLLOW ALL DIRECTIONS.
2.  These chairs are not to be used in the presence of a flammable anesthetic mixture with air, 
  oxygen, or nitrous oxide.
3.  DO NOT allow children or pets to play on, under, or around the Stretchair.
4.  DO NOT put hands, feet or clothing into any openings when changing positions or adjusting
     arms/legrests on chair.  Attendant MUST confirm that users arms, legs, hands and feet are safe
     while changing chair positions or SERIOUS INJURY MAY RESULT.
5.  Lock casters at all times, except when moving the chair.
6.  STAY CLEAR of the lift & recline mechanisms.
7.  DO NOT use chair for transporting in or with ANY type of vehicle or trailer. Winco chairs       
     have not been tested or approved for use by an occupant in any type of vehicle or trailer.

8.  NEVER use the chair arms or backrest as a seat; SERIOUS INJURY or damage may occur.

9.  Periodically check the tightness of all nuts, bolts and screws.

10. Immediately REMOVE FROM SERVICE; Any chair with broken mechanisms, torn upholstery,

   or other mechanical or visible damage.
11. NEVER transport user with chair arms in a "down" position. 
12. USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.
13. NEVER EXCEED the recommended weight capacity. 

(See Pages 5-6)

14. DO NOT transport patient with chair in the layflat position.
15. ONLY transport patients with the hydraulics in their LOWEST position.
16. DO NOT stand on footrest.
17. Secure Patient with safety belt at ALL times.

3

Summary of Contents for S300 Stretchair





















Reviews: