Winco DR2014 Installation And Operator'S Manual Download Page 16

16

OPM-109

REV A

12 MONTH LIMITED WARRANTY

WINCO,  Incorporated warrants to the original purchaser for 12 months or 1000 hours which ever occurs first, that goods 

manufactured or supplied by it will be free from defects in workmanship and material, provided such goods are installed, 

operated and maintained in accordance with WINCO written instructions.  

WINCO’s sole liability, and Purchaser’s sole remedy for a failure under this warranty, shall be limited to the repair of the 

product.  At WINCO’s option, material found to be defective in material or workmanship under normal use and service 

will be repaired or replaced.  For warranty service, return the product within 12 months or 1000 hours which ever occurs 

first from the date of purchase, transportation charges prepaid, to your nearest WINCO Authorized Service Center or to 

WINCO, Inc. at Le Center Minnesota.  

THERE IS NO OTHER EXPRESS WARRANTY.

To the extent permitted by law, any and all warranties, including those of merchantability and fitness for a particular 

purpose, are limited to 12 months or 1000 hours which ever occurs first, from date of purchase.  In no event is WINCO 

liable for incidental or consequential damages.  

Note: Some states do not allow limitation on the duration of implied warranty and some states do not allow the exclusion 

or limitation of incidental or consequential damages, so the above limitations may not apply in every instance.  This 

warranty gives you specific legal rights which may vary from state to state.

WINCO reserves the right to change or improve its products without incurring any obligations to make such changes or 

improvement on products purchased previously.

EXCLUSIONS:

WINCO does not warrant Engines. Engines are covered exclusively by the warranties of their respective manufacturers, 

see enclosed warranties.

WINCO does not warrant Component Parts that are warranted by their respective manufacturers.

WINCO does not warrant modifications or alterations which were not made by WINCO, Inc.

WINCO does not warrant products which have been subjected to misuse and/or negligence or have been involved in an 

accident.

This warranty does not include travel time, mileage, or labor for removal or re-installation of WINCO product from its 

application.

WINCO INC. • 225 S. CORDOVA AVE. • LE CENTER, MN  56057 • 507-357-6821

Summary of Contents for DR2014

















Reviews: