background image

IMPORTANT - PLEASE READ

FOR PRODUCTS WITH POWERED OPTIONS (Heat, Massage, etc...)

Read all instructions before using this product.

IMPORTANT SAFETY INSTRUCTIONS     -     SAVE THESE INSTRUCTIONS

To reduce the risk of electric shock when using an electrical appliance, basic precautions 

should always be followed, including the following:

     DANGER - Always unplug this product from the electrical outlet before cleaning, maintenance or when putting  
     on or taking off parts.

     WARNING:
1.  Unplug this product from the electrical outlet if this product is not to be used for extended periods of time.
2.  Supervision should be provided when this product is used by, on, or near children, invalids, or disabled persons.
3.  Use this product only for its intended use as described in this manual.  Do not use attachments not recommended  
     by the manufacturer.
4.  Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or     
     damaged, or dropped into water.  Return the product to an authorized Winco service center.
5.  DO NOT carry or pull this product by power supply cord or use the cord as a handle.
6.  Keep the cord away from heated surfaces.
7.  Do not use outdoors.
8.  To disconnect, turn all controls to the "off" position, then remove plug from outlet.  Do not "yank" cord.
9.  Clean switch with a damp cloth only – Warranty will be VOID if liquid is introduced into switch mechanism.
10.  Use only a certifi ed extension cord that is rated at 15 amperes; extension cords rated for less amperage may 
       over heat.  Care should be taken to arrange the cord so that the cord cannot be pulled or tripped over.
11.  DO NOT run recliner or other equipment over cord.
12.  Recliner comes with a grounded three blade plug, if the plug does not fi t into the outlet; contact a certifi ed 
       electrician to install the proper outlet.  DO NOT MODIFY THE PLUG IN ANY WAY.

DANGER:
i)   Never insert pins, or attach other metallic fasteners into/onto the upholstery of this chair.
ii)  Do not use this product if the covering shows signs of deterioration, such as checking, blistering, or cracking.
iii) KEEP DRY - Do not operate in a wet condition or environment.

WARNING:
i)   Long term, continuous exposure to heat may cause burns.  It is recommended that skin in contact with heated  
     area be checked for redness and blistering during long term usage. Do not use on an infant, invalid or unconscious   
     person.  Do not use on insensitive skin or on a person with poor blood circulation.  If you are uncertain if you        
     should use this product, please consult your physician about the use of heat and massage.
ii)  Do Not Crush/Pinch heating elements or wiring.

WARNING:  Connect this product to a properly grounded outlet only.  (see grounding instructions, pg 3)

2

Summary of Contents for 6980-6988













Reviews: