WINAICO is a trademark of Win Win Precision Technology Co., Ltd.
SIM2205-01(EN)
1
1.
Introduction
Thank you for choosing WINAICO for your solar system.
This manual is intended for qualified solar designers and installers to assist in the correct installation, operation and
maintenance of WINAICO’s WSP and WST series solar panels. WINAICO solar panels should only be installed by qualified
professionals authorised to carry out such work by their relevant local jurisdiction. Unqualified people should be kept a
safe distance away.
All relevant standards and local regulations must be followed. Failure to adhere to the instructions in the manual and to
local requirements may void product warranties. Improper installation of solar panels can be a safety hazard and will
result in low systems yields.
WINAICO solar modules are covered by product warranties accessible from our website and through our local offices.
We recommend that you insure your WINAICO photovoltaic system from natural and other hazards (e.g. lightning strikes,
vandalism).
If there are any points of ambiguity WINAICO recommends confirming proposed designs in writing before the time of
installation. Contact details are at the end of this document if you require further information or clarification. Feedback
on how we may improve this document is welcome.
Exclusion clause
These instructions only apply to WINAICO products. WINAICO does not accept liability for any damage resulting from
failure to observe the requirements listed. Please note that the person mounting the system is responsible for
connecting and sizing the system as well as compliance with all the safety specifications applicable to configuration and
installation. WINAICO assumes no responsibility beyond the proper function and safety of the modules. Also note the
installation instructions for other system components which may form part of the overall system. A structural analysis
may have to be produced for the entire project.
Please consult our website
for more details.
