9
When the FLS is switched off, it does not react either to commands from
the remote control unit or to buttons pressed on the manual switch.
To switch on the system, press the “On” symbol on the manual switch, in
other words both buttons at the same time, for 3 seconds
The FLS always answers registered commands by simultaneously lighting
the red and green LED for a short time.
It subsequently returns to the last state that was selected.
Point your remote control unit in the direction of the window actuator and
press the „Week“ button:
The week programme is now activated. One of the two LEDs is now
constantly lit. If the green LED is lit, the window is closed or closing. If the
red LED is lit, the window is open or opening.
*only FLS 2000 automatic
Manual switch
3 seconds
Week
OR
4
The operation of the FLS
4.1
Switching on the system
4.2
Selecting the week programme*
