WimTec PROOF S6 HyPlus, Assembly And Operating Instructions Manual

Page: 40 / 48

40 Shower control WimTec PROOF S6 -
Hy Plus
EN
PROOF S6 -
Hy Plus
Description of the functions
0.5 - 24 h
10 - 180 s
um 07:00 Uhr
um 07:00 Uhr
Serves to rinse water supply lines in order to remove stagnant water that
accumulates during longer periods of non-usage.
“ON” position = Intelligent stagnation flush activated (preset).
“OFF” position = Intelligent stagnation flush deactivated.
Time interval
Specifies the time between the stagnation
flushes.
Adjustable from 0.5 to 24 h at the interval
control (see p. 29).
Intelligent stagnation flush
If the fitting has not been used in the set
interval at the very least for the set flushing
duration, stagnation flushing is triggered for
the remaining duration configured.
Otherwise stagnation flushing is not
performed.
Intelligent stagnation flush:
DIP switch 4
ON
OFF
2 3 4 5 6 1
Minimum flushing duration
Specifies the minimum flushing
duration at the set time interval.
Adjustable from 10 to 180 s at the
time control (see p. 29).
um 07:00 Uhr um 07:00 Uhr
Note i
For visualisation of the
minimum flush duration,
see p. 42!