WimTec PROOF S6 HyPlus, Assembly And Operating Instructions Manual

Page: 31 / 48

Shower control WimTec PROOF S6 -
Hy Plus
31
EN
PROOF S6 -
Hy Plus
Assembly
1 2 3
5 6
1. Remove the flush-mount protective cover.
2. Cut off protruding parts from the flush-mount box so it
aligns with the tiles.
3. Where necessary, seal off space between wall and
flush-mount set with silicone.
4. Close the main water valve.
5. Open both integrated stop valves using a screwdriver.
6. Check and, if required, correctly align markings on the
mixing shaft and the thermostat cartridge.
ATTENTION!
Perform the following steps
in the order indicated!
!
4