28 Shower control
WimTec OCEAN P6 with thermal disinfection
EN
PROOF P6 with thermal disinfection
Assembly
Art. no. 121 032
17
15
14
12
16
12.
Connect the power cables to the electronics module and turn
on the power (causing the safety locking mechanism of the
magnetic valve to activate).
13.
Check whether the stop valves are open (knobs are aligned
alongside the water pipes).
14.
Hook the shower panel into the rear bracket strap.
ATTENTION! Be careful not to bend or crimp any cables or
tubes.
15.
Secure the shower panel from below at the hanger screw
using a washer and wing nut.
16.
Open the main water valve.
17.
Perform a system test.
ATTENTION!
Perform the following steps
in the order indicated!
!
13