12 Washbasin fitting
WimTec ONE WT
EN
ONE WT
Congratulations on purchasing the WimTec ONE WT.
In order to ensure that you will be able to enjoy this high-quality
product for many years, please take note of the following cleaning
and maintenance recommendations:
Use mild cleaning agents containing soap
Do not use abrasive, scrubbing, sealing or acidic
cleaning agents or disinfectants
Clean the fitting with a soft sponge or cloth only
Do not use steam cleaners
This manual is valid for the following products:
WimTec ONE WT wall fitting:
Art.No. 102 680
Delivery scope:
ONE WT sensor mit cover cap, electronics module, magentic valve
and stainless steel cover cap for valve unit.
Important installation notes:
Mounting and installation may only be performed by a qualified
service provider in accordance with DIN 1988, ÖVE/ÖNORM E8001
and VDE 0100 Part 701. When planning and installing sanitary
facilities, all relevant local, national and international standards and
provisions must be observed! Provide for 230 V / 12 V power unit
outside of the protected zone.
General notes
The “General installation
terms and conditions”
provided at
www.wimtec.com apply.
!
