Bath fitting
WimTec OCEAN B7
31
EN
OCEAN B7
Serves to disable the tub fill level memory function. This prevents
from adjusting the stored filling levels.
DIP switch 3 ON = Memory function enabled (default setting).
DIP switch 3 OFF = Memory function disabled.
Description of the functions
Memory function for tub filling levels
DIP switch 3
1. Switch on the device
By tapping the ON/OFF
icon, all AquaCap buttons
will pulse two times and
then glow faintly. The fit-
ting will remain in standby
mode for 3 min.
2. Start filling the bathtub
Tap any fill level icon to
start filling the bathtub.
The desired filling time can
be extended by tapping
one of the fill level icons
again (as long as the de-
vice is turned on).
You can manually stopp the
water flow by tapping the
fill level icon again whilst
the water flow is active.
3. Store tub filling time
Once the desired filling
time has elapsed (min.
10 s, max. like set on tub
filling control), you can
store it by pressing the
desired fill level icon for
approx. 5 s. The selected
icon will confirm the setting
by flashing twice.
approx. 5 s
2 x
1 x
um 07:00 Uhr
1 x
um 07:00 Uhr
um 07:00 Uhr
um 07:00 Uhr
ON
OFF
2 3 4 5 6
1
