26 Bath fitting
WimTec OCEAN B7
EN
OCEAN B7
Assembly
13.
Place the mixing shaft into the central position – the dot
should point upwards.
14.
Place the mixing lever into the central position – the knob
should point upwards.
15.
Put the glass front plate into place by carefully pushing in
inwards (click-lock system).
16.
Check whether the front plate is level.
If not, correct the alignment as described on page 27.
17.
Open the main water valve.
18.
Perform a system test.
For instructions on how to program the three fill level icons
for automatic tub filling, see page 31.
ATTENTION!
Perform the following steps
in the order indicated!
!
16
17
14
18
15
13
> Click <
Item A
