background image

 

 

WiMo Antennen und Elektronik GmbH 

Am Gäxwald 14,  D-76863 Herxheim  Tel. (07276) 96680   FAX 9668-11  

http://www.wimo.com                     e-mail: [email protected] 

W3DZZ+5  Drahtantenne 10-80m, 1000 Watt 

Best. Nr: 

11376

 

style; such positioning is beneficial for doing DX long distance QSO. 

• 

It is not recommended to strengthen the curtain hard to avoid breaking the antenna during heavy winds 

or extreme changes in temperature i.e. ice coating. You can prevent this by applying our whirl block and 
select a suitable load to hang the antenna in a sliding position. 

• 

Be aware, while lifting the Antenna, whenever possible have more than one person available to help in 

the installation, make sure to wear necessary safety gear and do not climb tower/trees during rainy /wet 
season  or  during  heavy  snow.  Keep  the  Antenna  away,  at  least  double  it’s  length  from  the  electricity 
wires/poles. For frequent installation/un-installation, one may use pulley at either both ends or center of 
the antenna depending on the antenna orientation. 

• 

Be sure to seal the connectors. 

 

8. Antenna SWR diagrams. 

 

 

 

 

9. Warranty. 

9.1 The term of warranty is 1 (one) year from the date of purchase/receiving antenna by our customer. During the warranty 
period, any manufacture related failures that have occurred during this period, would be taken care by the manufacturer at 
his expense. 
 
9.2 The manufacturer is not liable for the failure of antenna and does not guarantee its work in the following cases: 
a) Non-compliance of the installation and operation; 
b) Negligence during transportation; 
c) Configuring, testing and repair by persons without proper authorization; 
d) Breaking of the manufacturer's sealing marks; 
e) Damages or malfunction are caused by fire, lightning or other natural event. 

Summary of Contents for W3DZZ+5

Page 1: ...arization horizontal 3 W3DZZ 5 antenna description The attempts to introduce the three band dipole W3DZZ 3 into the European market led to an interesting acquaintance with a new design of an old antenna which additionally had 21 and 28 MHz That design was suggested by a well known Finnish radio amateur Jukka Heikinheimo OH2BR who further got to know about the modification from his friend OH2EC The...

Page 2: ...ance at 14 MHz band 6 Antenna assembling The installation of the antenna is quite easy Please note that longer wire segments are connected to the balun and shorter wire segments are extend from the trap In the center of the antenna two short segments are connected mechanically with the balun s eyebolt by stranding using brass wire Make sure that while pulling the antenna mechanical loading lay on ...

Page 3: ... snow Keep the Antenna away at least double it s length from the electricity wires poles For frequent installation un installation one may use pulley at either both ends or center of the antenna depending on the antenna orientation Be sure to seal the connectors 8 Antenna SWR diagrams 9 Warranty 9 1 The term of warranty is 1 one year from the date of purchase receiving antenna by our customer Duri...

Page 4: ...laim report prepared in the presence of the manufacturer s representative A unilateral act is effective only if the manufacturer reported refusal to send a representative 11 2 At the request of the manufacturer the defective parts or equipment should be sent to the manufacturer Shipping charges of the defective equipment from the buyer to the manufacturer shall be paid by the buyer Shipping charge...

Reviews: