Now, press
Previous Menu
to return to the Step
Sweep Menu display (or the Analog Sweep Menu
display if operating in analog sweep frequency
mode).
Notice the changes to the Step Sweep Menu display
(below). These changes indicate that the alternate
sweep frequency mode is active.
Now, press
Alt Swp Menu
to return to the Alter-
nate Sweep menu.
Selecting an Alternate Sweep Range
To go to the Alternate Range menu (below) from the
Alternate Sweep menu, press
Alt Range
.
Select the alternate sweep range (
Full, F1-F2
,
F3-F4
,
F5-dF
, or
F6-dF
). The menu then displays the cur-
rent frequency parameters for the selected sweep
range. If you wish to change a frequency parameter,
use the menu edit soft-key to open the parameter,
then edit it.
LOCAL (FRONT
SWEEP FREQUENCY
PANEL) OPERATION
OPERATION
681XXB OM
3-35
Changed: November 1995