LOCAL OPERATION
SYSTEM
–MENU MAPS
CONFIGURATION
681XXB OM
4-17/4-18
Changed: November 1995
SYSTEM
MODULATION
CW/SWEEP
SELECT
FREQUENCY
CONTROL
LEVEL/ALC
SELECT
LEVEL
CONTROL
Select Interface Language
(Option 19 Only)
Select GPIB Address
Select Normally Open or Closed
Pen Lift Relay Contacts
5V or -5V level
for Video Markers
Select RF On or Off at Reset
Select CR or CR/LF Line Terminator
Brightens The Display
Dims The Display
Select RF On or Off
During Retrace
Select Reset For Single Sweep, 0 For Bottom
of Sweep Ramp, 10 For Top of Sweep Ramp
Select RF On or Off During Frequency
Switching In CW and Step Modes
5V or -5V Level For Retrace
and Bandswitch Blanking
Set Frequency
Increment
Set Power Level
Increment
Increment Mode
On/Off
Set Time
Increment
Select Power Meter Address
Select Power Meter Type
SS Mode On/Off
Figure 4-13. System Configuration Menu
Map
NOTE
Refer to Chapter 3, paragraph 3-13
for System Configuration operating
instructions.
