![WilTec ARTICLE 60252 Operation Manual Download Page 5](http://html.mh-extra.com/html/wiltec/article-60252/article-60252_operation-manual_983782005.webp)
To prevent possible fire, the space between the heater and the wall intended for the air inlet or
outlet must not be blocked in any way.
This heater has hot and sparking parts inside. Do not use in areas where petrol, paint or
flammable liquids are stored or used.
Use this heater only as described in this manual. Any other use not recommended by the manu -
facturer may result in fire, electric shock, or personal injury.
Avoid using an extension cord as the extension cord may overheat and pose a potential fire haz-
ard.
To avoid overloading a circuit, the heater must not be connected to a circuit (e.g. multiple socket)
to which other devices are already connected. Do not connect the heater below a socket.
It is normal for the plug to feel warm. However, a loose fit between the outlet (plug-socket) and
the plug can cause overheating and deformation of the plug. Contact a qualified electrician to re-
place loose or worn sockets.
The performance of this heater can vary and the temperature can be so intense that the skin can
burn. This heater is not recommended for people with reduced heat sensitivity or an inability to re-
act to burns.
© by WilTec Wildanger Technik GmbH
Seite 15
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de