WilTec 62354 Operation Manual Download Page 9

Disposal regulations

EU guidelines  regarding the disposal  of scrap electric appliances  (WEEE, 2012/19/EU) were imple-
mented in the law related to electrical and electronic equipment and appliances.

All WilTec electric devices that fall under the WEEE regulations are labelled  with the crossed-out
wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the
domestic waste.

The company WilTec Technik GmbH has been registrated in  the German registry  EAR under the
WEEE-registration number DE45283704.

Disposal of used  electrical and electronic  appliances
(intended   for   use   in   the  countries   of   the   European
Union and other European countries  with a separate
collection system for these appliances).
The logo on the article or on  its packaging points out
that this article must not be treated as normal house-
hold waste but must be disposed to a recycling collec-
tion   point  for   electronic  and  electrical  waste   equip-
ment. By contributing to the correct disposal of this art-
icle you protect the environment and the health of your
fellow men. Environment and health are threatened by
inappropriate disposal.

Material recycling helps reduce the consumption of raw materials.

Additional information on  recycling this article can be provided by your  local community,  municipal
waste disposal facilities or the store where you purchased the article.

Address:

WilTec Wildanger Technik GmbH

Königsbenden 12 / 28

D-52249 Eschweiler

Important notice:

The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions
manual require the written permission of WilTec Wildanger Technik GmbH.

© by WilTec Wildanger Technik GmbH 

Item 62354

Page 9 

http://www.WilTec.de

http://www.aoyue.eu

  

  

04 2021-1

http://www.teichtip.de

Summary of Contents for 62354










Reviews: