WilTec 62354, Operation Manual, Page: 7 / 9

Figure 1 Figure 2
Commissioning
Assembly
1. Take the two parts of the stirrer out of the box (see Fig. 1).
2. Connect the two parts (see Fig. 2).
3. Tighten them with a wrench (see Fig. 3).
4. Place the stirrer on the discharge shaft (see Fig. 4).
5. Tighten the screw of the stirrer (see Fig. 5).
Figure 1 Figure 2 Figure 3
Figure 4 Figure 5
© by WilTec Wildanger Technik GmbH Item 62354 Page 7
http://www.WilTec.de
http://www.aoyue.eu 04 2021-1
http://www.teichtip.de