WilTec 61958 Operation Manual Download Page 8

Do not pull the mains plug to stop the compressor. Always use the on/Off switch on the com-
pressor.

If the release valve does not work when the engine stops, try to correct the fault before operat-
ing the compressor and damaging the engine.

The oil must always be clean and you must make sure that the oil level is correct.

Always disconnect the mains plug when unscrewing a valve.

Maintenance

The first oil change should take place after the first 10 hours.

Afterwards an oil change every 20 working hours is sufficient.

Every 60 working hours, open the drain cock to let condensation water out of the tank.

Clean the air filter every 120 working hours.

Warnings

Avoid absolutely unscrewing any connection parts without first relieving the pressure in the
device and tank as well as the pipes.

It is forbidden to drill holes or weld or intentionally deform the compressed air tank.

Always unplug the compressor before carrying out any work on the compressor!

The ambient temperature for proper operation must be between 0 

 and +25

 

.

Do not spray the compressor with water jets or flammable liquids.

Do not place any flammable objects near the compressor.

Set the push button and power button to “OFF” when pauses are made or the unit is not in
use.

Never aim the air jet at people or animals.

Never transport the compressor as long as there is pressure in the tank.

Make sure that some parts of the compressor (head, pressure hoses) can become very hot.
Do not touch these parts as there is a risk of burns!

When transporting the device, make sure that you only use the handles and handles provided
for lifting and pulling the device.

Children and animals must be kept away from the operating area of the machine.

If the power cable or plug is damaged, do not use the compressor. Contact the manufacturer
or an authorized service partner.

If the compressor is placed on a shelf or higher than the floor, it must be secured against fall-
ing during operation by means of a suitable fastening.

Do not push any objects into the protective grilles and do not reach in with your hands as this
may cause injury to the user or damage to the device.

Always disconnect the mains plug after using the compressor!

© by WilTec Wildanger Technik GmbH 

Item 61958

Page 8

http://www.WilTec.de
http://www.aoyue.eu  

  

02 2021

-1

http://www.teichtip.de

Summary of Contents for 61958













Reviews: