WilTec 61958 Operation Manual Download Page 3

Introduction

Thank you for purchasing this quality product.

 To minimize the risk of injury we urge that our cli-

ents take some basic safety precautions when using this device. Please read the operation in-
structions carefully and make sure you have understood its content.

Keep these operation instructions safe.

Important information

Caution:

Read   the   instruction   manual   carefully   before   putting   the   device   into   operation.   Im-
proper use may result in damage to persons and property. Persons who are not familiar
with the manual must not operate the device.

Keep the instructions for use. Children and adolescents are not permitted to use the
device.

The majority of accidents during use of the compressor are due to non-compliance with basic
safety regulations. In order to avoid accidents, all potential sources of danger should be identi-
fied in good time and the relevant safety regulations should be observed.

Never use the compressor improperly, but only as recommended by the manufacturer, and
only if you are absolutely sure that there is no danger to the user or persons in the vicinity.

Note:

  Check the device before each use. If a damage is found, do not continue to use the

device. Repairs must only be carried out by the manufacturer or an authorized service partner.
Never open the device yourself.

Safety precautions

Read all instructions attentively and carefully!

Use lines and air tools suitable for the pressure higher than or equal to the operating pressure
of the compressor.

Drain the condensation water from the boiler daily or every 4 operating hours. Open the ap-
propriate device and tilt the compressor to drain the accumulated water.

To avoid danger, the compressed air jet must never be directed at persons or animals.

To avoid combustion, never touch the pipes, engine or any other hot components of the com -
pressor.

Do not make any changes to the compressor. Contact the manufacturer or an authorized ser-
vice partner for all repairs. Unauthorized modifications may affect compressor performance or
cause serious accidents if performed by personnel who do not have the necessary technical
knowledge.

Solvents such as petrol, thinner, diesel oil or other substances containing alcohol can damage
the plastic parts. These parts should not be cleaned with such substances, but with soapy wa-
ter or suitable liquids.

If the compressor produces strange noises or strong vibrations during operation, or if it is de-
fective, the compressor must be stopped immediately. Contact the manufacturer or an author-
ized service partner for troubleshooting.

Operate the compressor at the voltage indicated on the data plate. If the compressor is oper -
ated at a voltage higher than the specified nominal voltage, the motor may be subjected to un-
acceptably high temperatures.

Always keep the motor ventilation grille clean. Clean the grate at regular intervals if the com-
pressor is used in heavily soiled environments.

Check regularly that all screws and plates are securely fastened.

When operating the compressor, follow all instructions in this manual. Prevent the compressor
from being used by children or persons unfamiliar with its operation.

The compressor is a machine that produces compressed air. Never use the compressor for
work that is not described in the operating manual.

© by WilTec Wildanger Technik GmbH 

Item 61958

Page 3

http://www.WilTec.de
http://www.aoyue.eu  

  

02 2021

-1

http://www.teichtip.de

Summary of Contents for 61958













Reviews: