WilTec 61127, Operating Manual

Page: 5 / 8

© by WilTec Wildanger Technik GmbH Item 61127 Page 5
http://www.WilTec.de
http://www.aoyue.eu 05 2021 -1
http://www.teichtip.de
Cant hook
see Fig. 8 and 9
1. Insert the handle into the mounting hole of the bracket and secure the handle with the
9.5×38 mm quick release pin (see Fig. 4).
2. Use the 9.5×68 mm quick release pin to place the hook assembly into the mounting hole in the
bracket unit. The two mounting holes are optional depending on the respective situation (see
Fig. 5).
3. Finally, mount the end onto the bracket structure using a 10×65 mm pin.
Log pick-up
•
Mount the end onto the bracket unit using the M10×65 screw, M10 washer and M10 nut.
•
Then attach the hook assembly to the bracket assembly with a 9.5×68 mm quick release pin.
The hook assembly can be moved to the appropriate location according to actual use.
•
Finally, use the chain and the 10×65 mm pin to a fixed object, e.g., a tree trunk, to attach the
log (see Fig. 12 and 13).