WilTec 61127, Operating Manual

Page: 4 / 8

© by WilTec Wildanger Technik GmbH Item 61127 Page 4
http://www.WilTec.de
http://www.aoyue.eu 05 2021 -1
http://www.teichtip.de
Unpacking
Warning! Do not operate the device if parts are missing. Replace missing parts before operating the
device. Failure to do so could result in malfunction and personal injury.
Remove all parts and accessories from the package, inspect them for damage, and ensure that all parts
are included.
Assembly and installation
•
Mount the bracket to the unit using the M10×65 screw, M10 washer and M10 nut.
•
Mount the hook with the M10×65 screw and the M10 lock nut on the end piece; they form the
hook assembly.
•
Assemble the other components based on different applications.
Operation
•
Insert the handle into the mounting hole of the bracket and fix it with the 9.5×38 mm quick re-
lease pin (see Fig. 4).
•
Then the hook assembly is snapped into the mounting hole of the mounting unit with the
9.5×68 mm quick release pin. The two mounting holes are optional depending on the situation.
•
Finally, mount the end piece with the M10×65 screw on the mounting unit (see Fig. 6 and 7).